Guide to Advanced Construction
Jump to navigation
Jump to search
This article or section is from the VOREstation wiki.
This article or section is directly taken from the VOREstation wiki, and should not be fully relied on for CHOMPstation. You can help by updating it.
The page details the construction of "machines", a class of fairly complex objects used aboard the station. The basic process of construction is the same for all machines; only the parts used change.
- Activate a stack of at least 5 metal sheets in-hand.
- Select 'Frame' from the list that appears
- After a short crafting time, frame parts will be on the floor where your character is standing. File:Frame parts.png
- Pick those up and activate them to select the type of machine you are making. (Most things just use the generic Machine frame or computer) File:Empty Machine Frame.png
- After making a frame, right click it to rotate the facing if it's a directional machine like body scanners or consoles.
- Use a wrench on it to secure the frame to the floor.
- Insert the circuit board for the machine you are making into the frame. (Get these from R&D.) File:Circuit Frame.png
- Apply a screwdriver to secure the circuit board.
- Insert wires into the frame.File:Wired Frame.png
- You can now examine the frame to see what extra parts the machine needs. (Also get these parts from R&D. You can use upgraded parts for some machines!)
- After inserting all required parts (examining will give a message along the lines of 'Requires nothing'), use a screwdriver on it again.
Some machines can be upgraded by science to make them more efficient.
Machines
| Name | Parts needed | |
|---|---|---|
|
Cloning Pod |
2 Pieces of Cable 2 Manipulators 2 Scanning Modules 1 Console screen |
| File:Scanner.gif | Cloning Scanner |
2 Pieces of Cable 1 Manipulator 1 Scanning Module 1 Console screen 1 Micro laser |
|
Autolathe |
2 Pieces of Cable 1 Manipulator 3 Matter bins 1 Console screen |
| File:Protolathe.gif | Protolathe |
2 Small beakers 2 Manipulators 2 Matter bins |
| File:Destructive analyzer.gif | Deconstructive Analyser |
1 Manipulator 1 Scanning Module 1 Micro laser |
| File:Circuit imprinter.gif | Circuit Imprinter |
1 Matter bin 1 Manipulator 2 Small beakers |
| File:Broadcaster.gif | Subspace Broadcaster |
1 Pieces of Cable 2 Manipulators 1 subspace crystal 1 subspace filter 2 High-powered Micro laser |
| File:Sreceiver.gif | Subspace Receiver |
2 Manipulators 1 Scanning Module 1 Micro laser 1 subspace filter 1 subspace ansible |
|
Exosuit Fabricator |
1 Manipulator 2 Matter bins 1 Console screen 1 Micro laser |
| File:Rndserver.png | RnD Scanner |
2 Cable coils 1 Scanning module |
| File:Hub.gif | Telecoms Hub |
2 Pieces of Cable 2 Manipulators 2 Subspace filters |
| File:Bus.gif | Telecoms Bus |
1 Piece of Cable 2 Manipulators 1 Subspace filters |
| File:Relay.gif | Telecoms Relay |
2 Pieces of Cable 2 Manipulators 2 Subspace filters |
| File:Server.gif | Telecoms Server |
1 Piece of Cable 2 Manipulators 1 Subspace filter |
| File:Pro.gif | Telecoms Processer |
2 Pieces of Cable 3 Manipulators 1 Subspace filter 2 Subspace treatment 1 Subspace analyzer 1 Subspace amplifier |
| File:Pacman.png | P.A.C.M.A.N.-type portable Generator |
2 Pieces of Cable 1 Micro-laser 1 Matter bin 1 Capacitor |
|
S.U.P.E.R.P.A.C.M.A.N.-type portable Generator |
2 Pieces of Cable 1 Micro-laser 1 Matter bin 1 Capacitor |
| File:CyborgRecharger.png | Cyborg Recharging Station |
2 Capacitors 1 Power Cell 1 Manipulator |
|
Gas Cooling System |
1 Matter bin 1 Manipulator 2 Capacitors 2 Pieces of Cable |
| File:Heater.png | Gas Heating System |
1 Matter bin 1 Manipulator 2 Capacitors 5 Pieces of Cable |
| File:Biogenerator.gif | Biogenerator |
1 Matter bin 1 Manipulator |
| File:Borgcharger.png | Borg Recharger |
2 Capacitators 2 Manipulators 1 Power cell 5 Pieces of Cable |
Guide Table 
| ||||||||
| Starter | CHOMP-Specific | Medical | Engineering | Science | Security | Other | Development | |